Acura 08L07-TA1-203 Installation Instructions Manual Download Page 4

Page: 4 / 6

4 of 6

BII 47360 (1209)

2904110K

LOCKING
CLAMP LEVER

3001110K

Do not tighten
at this time.

MOUNTING
LEVERS (3)
Reuse.

BICYCLE
ATTACHMENT

T-BOLTS (3)

BICYCLE
ATTACHMENT

3001120K

MOUNTING LEVER

Push down
to lock.

12. Position the bicycle attachment over the T-bolts

on the carrier bars, and install the mounting levers
removed in step 8. Do not tighten or lock the
mounting levers at this time.

Attaching the Bicycle Attachment

13. Open the locking clamp lever.

14. Turn and adjust each mounting lever to lock the

bicycle attachment to the roof rack. Check for firm
pressure while you push down on the mounting
lever to lock it into place.

•

If the mounting lever pressure is too tight (the
lever will not lock into place), lift up on the
lever and turn it counterclockwise.

•

If the mounting lever pressure is too loose (the
lever locks into place, but the bicycle
attachment is loose on the crossbars), lift up
on the lever and turn it clockwise.

Summary of Contents for 08L07-TA1-203







Search results

Summary of Contents for 08L07-TA1-203

Reviews:

Related manuals for 08L07-TA1-203

Brands by name

Popular brands

Acura 08L07-TA1-203, Installation Instructions Manual

Search results

Summary of Contents for 08L07-TA1-203

Reviews:

Related manuals for 08L07-TA1-203

Brands by name

Popular brands