4 of 6
BII 43678-45285 (1010)
© 2010 American Honda Motor Co., Inc. – All Rights Reserved.
9.
Turn the left roof molding over, and remove the
seven clips from the left roof molding. If any clip
stayed to the roof, remove it.
10. On the work bench, measure and mark the left roof
molding at the measurements shown.
11. While wearing eye protection, use an air saw to cut
the left roof molding at the marks you made. Make
the cuts on the work bench.
911904CS
LEFT ROOF
MOLDING
ROOF
3 CLIPS
(Reuse.)
CLIP
FRONT
911919AS
Discard.
195 mm
(7.7 in.)
LEFT ROOF
MOLDING
AIR SAW
75 mm
(3.0 in.)
606 mm
(23.8 in.)
625 mm
(24.6 in.)
172 mm
(6.8 in.)
CUT PORTION OF
LEFT ROOF
MOLDING
12. Reinstall three of the seven clips removed in step 9.
13. Install five spacers to the ends of the cut pieces of
the left roof molding.
14. Reinstall the cut pieces of the left roof molding onto
the vehicle.
911907BS
SPACER
LEFT ROOF MOLDING
CLIP
(Reuse.)
5 mm (0.2 in.)
3 CUT PIECES OF
LEFT ROOF
MOLDING
911920AS
STUD
BOLT
CLIP
3 CUT PIECES OF
LEFT ROOF
MOLDING
625 mm
(24.6 in.)
606 mm
(23.8 in.)
