2 of 7
BII 28356 (0411)
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Flat-tip screwdriver
10 mm Combination wrench
Ratchet
10 mm Socket
Clip remover
Utility knife
Shop towel
Tape measure
Electrical tape
Diagonal cutters
•
Using a clip remover, gently pry up on the
center console panel to release the eight clips.
•
Unplug the two seat heater connectors (if
equipped), and remove the center console
panel.
A/T Model:
•
Using a clip remover, gently pry up on the
center console panel to release the eight clips.
•
Unplug the two seat heater connectors (if
equipped), and remove the center console
panel.
2031040S
CLIPS (8)
SEAT HEATER CONNECTOR
CENTER CONSOLE
PANEL
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures should
not be attempted by “do-it-yourselfers.”
1.
Make sure you have the anti-theft codes for the
audio system and navigation system, then write
down the radio station presets.
2.
Disconnect the negative cable from the battery.
3.
Remove the center console panel.
M/T Model:
•
Remove the shift knob by turning it
counterclockwise.
•
Remove the lock nut.
2031030S
CLIPS (8)
CENTER
CONSOLE
PANEL
SEAT HEATER CONNECTOR
2031021S
SHIFT
KNOB
LOCK
NUT
