User Manual of Network Zoom camera
71
Configuration > Advanced Configuration> Storage > Record Schedule
Figure 7-6 Recording Schedule Interface
2.
Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3.
Set the record parameters of the zoom camera.
Figure 7-7 Record Parameters
Pre-record:
The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the pre-
record time is set as 5 seconds, the zoom camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
25 s, 30 s or not limited.
Note:
The pre-record time changes according to the video bitrate.
Post-record:
The time you set to stop recording after the scheduled time or
the event. For example, if an alarm triggered recording ends at 11:00, and
the post-record time is set as 5 seconds, the zoom camera records until
11:00:05. The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2
min, 5 min or 10 min.
Note:
The Pre-record and Post-record parameters vary depending on the
