User Manual of Network Zoom camera
30
5.4.4 Setting / Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom functions. There is 1 pattern for
customizing.
You can use the RS485 or RS232 interface to trigger this function. For detailed
configuration, please contact our technical support or refer to technical manual.
5.4.5 Configuring Power Off Memory
Purpose:
The dome can resume its previous PTZ status or actions after it restarted from a
power-off. You can set the time point of which the camera resumes its PTZ status.
1.
Enter the Basic PTZ Parameter Configuration interface:
Configuration
>
Advanced Configuration
>
PTZ
>
Basic
Figure 5-8 Basic PTZ Configuration Interface
2.
Set the resume time as 30 seconds, 60 seconds, 300 seconds or 600 seconds
before power-off.
3.
Click
to save the settings.
5.4.6 Configuring Park Actions
Purpose:
This feature allows the zoom camera to start a predefined park action (scan, preset,
patrol, etc.) automatically after a period of inactivity (park time).
Steps:
1.
Enter the Park Action Settings interface:
Configuration
>
Advanced Configuration
>
PTZ > Park Action
Figure 5-9 Set the Park Action
