HD Intelligent IP Speed Dome Installation Manual Chinese V1.0
25
【image quality】Effective when it is variable code stream. Switch between
worse/bad/general/good/better/best. The larger code stream value the better image quality.
【I frame interval】：Camera capture key frame time interval, can be set between 2-12S.
Note：When I frame interval is too large, the preview screen will Caton.
【video/audio】：When main stream is open, it is default not to be modified. Sub-stream needs to be
enabled manually. Audio for both the streams needs to be enabled manually.
Attention：①Sub stream should be enabled when used for mobile monitoring.
【Encoder static configuration】：Set the camera coding level，switch between baseline/main profile/high
profile，The higher the level, the larger the stream, the better the preview quality.
5.3.3．Network setup
Click ，as follows: Configure the camera's IP address, gateway, DNS, etc..
5-12
【Automatically obtain an IP address】
：Camera connect to the router(DHCP should be enabled),then IP
address will be obtained automatically.
【IP address】Set the IP address. Default: 192.168.1.10.
【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.should match with the PC.
【Gateway】Set the default gateway. Should match with the PC.
【DNS server】
：Config the DNS server, should match with the PC, wrong DNS will get the cloud service
out of work.
【TCP port】Default: 34567.
【HTTP port】Default: 80.
Note: When camera is connected to public network via PPPOE, 3G or port mapping, HTTP port required
to change the non-80 ports.
【MAC】
：Show the physical address of the camera, MAC address for ARSP and other functions.
【Transfer Policy】There are four strategies: Adaptive / Quality Priority / Smooth priority /Network
transmission Priority.
Adaptive: when network bandwidth is small, the preview screen automatically jump to sub-stream
to ensure smooth preview
Quality Priority: Whether the network bandwidth is large enough, the preview screen is always
displayed in the main stream, when the bandwidth is not large enough ,screen will Caton.
Smooth priority: Change encoder settings and lower the stream without reducing frame rate to ensure
the smooth screen.
