HD Intelligent IP Speed Dome Installation Manual Chinese V1.0
16
5-1
5.1.Record
Click
，as follows:
5.1.1. Record settings
Click
，as follows:
5-2
This function allows you to config the time length and pre-record time for each record.We have
three settings: Configuration, manual or stop.
Configuration:Record according to the set video type (common, detection and alarm). Max.four different
time interval can be set per day.
Manual: Enable this function,network camera starts record consistently.
Stop: Network camera stops recording.
Note：1. Detect and alarm recording should match with recordings.
2.Record end time should be longer than start time,
3. Record files are stored into TF card,make sure TF card is plugged in and confirm it.
4. TF card should have enough space for cycle overwrite.
5.Default open,plug TF card,boot up,then record starts.
