Acumen AiP-N Series Instruction Manual Download Page 2

Page: 2 / 74

AiP-N series 16CH/9CH/4CH Manual

Introduction

The AiP-N NVR series:



16CH

– 16-channel standalone Network Video Recorder



9CH

– 9-channel standalone Network Video Recorder (not front panel supported)



4CH

– 4-channel standalone Network Video Recorder (not front panel supported)

The AiP-N series offers a standalone solution for managing AiP cameras and systems. It uses high quality

H.264 decoders to deliver 1080P/720P/D1/VGA AiP camera streams. Each channel can be individually

configured to SD and/or HD resolution to optimize storage space.

Embedded HDMI and VGA engines offer 3D intellectual motion adoptive refinement, providing a maximum

resolution of 1080P. The TV wall design allows the NVR to be cascaded via TCP/IP network for easy

cabling. AiP-N series has an IP scan facility, (WS Discovery) which locates all the cameras on the network

and imports a preview thumbnail of each channel. This is an automated installation wizard that speeds up

commissioning. The self-diagnostic feature monitors the internal temperature, cooling fan, HDD I/O speed,

network status and information can be accessed via the health check report.

The NVR can be controlled via multiple input methods; front panel keypad with jog/shuttle control, remote

control, keyboard with PTZ joystick, touch screen monitor, or USB mouse. When connected to a touch
screen monitor, Smartphone style features like ‘pinch and zoom’ can be used to navigate the system.

The AiP-N series provides various export methods including DVD/RW, USB DVD/RW, USB flash disk, and

HTTP download playable via Backup Manager. Extensive support for iPhone, iPad, BlackBerry and Android

allows for remote viewing of the connected cameras at high frame rates. Browser based remote live

monitoring and video playback features are also supported.

Features



Standalone NVR



Touch screen interface



1080P 16-channel/9-channel/4-channel at 25FPS with up to 48MBPS network throughput.



Full HD 1920*1080P HDMI output



VGA output up to 1920*1080P, built-in 3D intellectual motion adoptive refinement and vivid image

enhancement engines



Can support up to 8 SATA HDDs for 16-channel, 4 SATA HDDs for 9-channel, and 2 SATA HDDs

for 4-channel



Easy-to-use jog/shuttle front panel control



HTTP browser based viewing including NVR configuration, PTZ control, playback, and live

monitoring



IP scan utility



Extensive support for iPhone, iPad, BlackBerry and Android devices



Slim DVD R/W supported (optional)



AIM 2.6 software supported

Trademarks and registered trademarks

Summary of Contents for AiP-N Series











































































Search results

Summary of Contents for AiP-N Series

Reviews:

Related manuals for AiP-N Series

Brands by name

Popular brands

Acumen AiP-N Series, Instruction Manual

Search results

Summary of Contents for AiP-N Series

Reviews:

Related manuals for AiP-N Series

Brands by name

Popular brands