53
【
PPPoE setup
】
Picture4.23 PPPOE
Enable:
Reverse■ means choose, setting can become effective.
Input the user name and password that ISP
（
Internet service provider
）
provides. After saving
it reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP
address will change into dynamic IP address after above operation is well done.
Operation
：
After PPPoE dialing successfully look up the IP address in the [IP address] and
obtain the current IP address. Then use this IP address to visit the DVR through user port.
【
NTP setup
】
