41
4.3.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss alarm is turned on
and the linkage function is turned on.
Same as motion detect function, video loss is different between Hybrid mode & Full digital
mode:
Digital channel: not only to enable video loss function at local side, but also to enable the
remote device that was connected. when remote device with video loss, local side will start
alarm recording, otherwise this function is not enable.
Hybrid mode: only need to enable video loss function at local side.
Note
: "Advanced" button is the same as right click.
Video loss in Hybrid(HVR) mode
Pic 4.9 Video loss
Set method: refer to chapter 4.3.1. Motion detect
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
