2
1.
Setup
1.1.
When ordering the
(AQ9900008)
TPD, for hardware, you will receive
the touch panel display,
TPD power supply, and (4) mounting screws.
1.2.
Connect the laser connection kit(s) to the port(s) on the left and/or right side of the TPD with a
DB-9 cable. Ensure the laser is powered up. When using a single laser, please use port A if
possible.
1.3.
Connect the power cable to the TPD and a power source. Power cable port located on bottom
of unit.
Left Side - Serial Ports
Right Side - Serial Ports
Power Button
Bottom Side - Power Cable