background image

3

2

Congratulations on your new AcuRite product. To ensure the best 

possible product performance, please read this manual in its entirety 

and retain it for future reference.

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this 

product. Locate the tab and peel off to remove.

Package Contents

1. Display unit with tabletop stand

2. 5-in-1 sensor

3. Sensor mounting bracket

4. Mounting hardware

5. Snap-in debris filter for rain collector

6. Power adapter

7. USB cable

6. Instruction Manual

www.

AcuRite

.com

Register online

to receive 1-year

warranty protection

PRODUCT REGISTRATION

Register a Product

IMPORTANT

PRODUCT MUST BE REGISTERED 

TO RECEIVE WARRANTY SERVICE

10

9

Features & Benefits

5-IN-1 SENSOR

1.   Rainfall Collector Funnel

2.   Solar Cell Panel

Converts sunlight into power to run 

internal aspirating fan. 

Internal Aspirating Fan

 (not 

shown)

Draws ambient air into sensor to 

reduce solar radiation heating, 

resulting in more accurate readings.

3.   A-B-C Switch

ID code that must match displayʼs 

A-B-C switch to ensure units 

synchronize.

4.   Battery Compartment

5.   Temperature & Humidity Sensors 

(internal)

6.   Mounting Point

7.   Wind Speed Anemometer

8.   Wind Direction Vane

9.   Mounting Bracket

10. Mounting Hardware

Includes anchors and screws.

11. Debris filter

Snaps into rain collector to filter out 

twigs, leaves, etc.

1

2

8

6

4

3 5

7

11

Summary of Contents for 1025














Reviews: