background image

- 9 -

- 8 -

SEC TION 3 • OPERATION

SEC TION 3 • OPERATION

History Mode Graphing

This weather station features a selectable history mode which will graph and 
display the changes for the last 12 hours (-12,-6,-3,-2,-1, 0). There are 3 selectable 
weather categories; Barometer (barometric pressure), Temperature or Wind 
Speed. Press the “HISTORY MODE” button to alternate through the 3 options. Note 
the graphing icon “          “ next to the currently selected data window.

BAROMETER: hourly reading on the hour.
TEMPERATURE: hourly (outdoor) temperature reading on the hour.
WIND SPEED: hourly wind speed AVERAGE reading.

E

Wireless Signal Reception Icons

The main unit has a signal reception icon in the outdoor wind speed/ temperature 
display area.  If most or all four of the bars are present, wireless reception is good 
and no action is required. If there are a low number of “bars” present,  you may 
experience wind speed/temperature inaccuracy. In either case,  you may need to 
relocate the main unit or the wireless sensor.

The main unit has a signal reception icon near the atomic clock display. If the atomic 
clock signal bars are low, the clock may be inaccurate or may not automatically 
adjust for daylight saving time (DST). Refer to the troubleshooting section in this 
manual if you are having reception issues.

F

Seasonal Window (wind chill/dew point/heat index)

This weather station features a “Seasonal” window which will automatically display 
the wind chill, the dew point or the heat index information when it is relevant.

D

Moonphase

This weather station features a moonphase window which will automatically display 
the current moonphase, provided the calendar is set properly.

G

Wind Speed Data Window

This weather station features an advanced 
wind speed data window that provides the 
wind speed, the peak value and the average 
value.

WIND SPEED: most current wind speed reading, 
this value is updated every 18 seconds.

PEAK: the highest wind speed reading 
recorded in the last hour.

AVERAGE: the combined averaged wind speed 
readings from the last 2 minutes.

NOTE: The wireless sensor must be placed 
outdoors to observe outdoor wind speed.

C

C

D

E

F

F

G

WIND CHILL

DEW POINT

HEAT INDEX

less than 40ºF (4ºC)

between 41ºF - 79ºF

above 80ºF (27ºC)

(5ºC - 26ºC)

This wireless weather station features a MIN/MAX memory feature which records the 
MINIMUM and MAXIMUM indoor & outdoor temperature and humidity readings.

To view the MINIMUM temperature and humidity readings, press and release the 

MIN/MAX

” button. Note the “MIN” icon on the display.

To 

clear

 the MIN recorded values, press 

and hold

 the “

+

” and “

SCALE

” buttons 

simultaneously for 3 seconds while in the MIN view mode. Dashes will display in the 
display to confirm you have cleared the MIN values for outdoor temperature and 
indoor temperature/humidity.

To view the MAXIMUM temperature and humidity readings, press and release the 

MIN/MAX

” button. Note the “MAX” icon on the display.

To 

clear

 the MAX recorded values, press 

and hold

 the “

+

” and “

SCALE

” buttons 

simultaneously for 3 seconds while in the MAX view mode. Dashes will display in the 
display to confirm you have cleared the MAX values for outdoor temperature and 
indoor temperature/humidity.

Main Unit : MIN/MAX Memory

NEW

WAXING

CRESCENT

WANING

CRESCENT

WAXING

GIBBOUS

WANING

GIBBOUS

1ST

QUARTER

3RD

QUARTER

FULL

Summary of Contents for 00634








Reviews: