11
HCVA/HCVAR
Note!
The remote control is operated
at a short press per function.
Long pressures will cause shorter
battery life.
By default, HCVAR comes with a paired remote control (item no.# 111890).
One chain drive remember max. 20 pcs. remote controls.
To access the “Program button” in the drive,
remove the plastic cap on the top of the housing.
Program button
1) Press and hold the “program button” on the chain drive until the
LED / Buzzer indicator lights / beeps.
RELEASE THE BUTTON IMMEDIATELY.
2) Within 5 seconds - press any button on the remote control and its LED indicator lights up.
3) The LED / Buzzer indicator in the chain drive turns off after one flash / beep = the remote
control and chain drive are now paired.
If you need to remove one remote, you have to delete all of them; by pressing the “Program
button” for more than 3 seconds until the LED / Buzzer indicator has been switched on and off
again. Now all remote controls are deleted and you need to pair all of them again.
It is possible to connect a wind / rain sensor wireless to the chain drive.
(See our user manual for wind and rain sensor at www.actulux.com)
Rain sensor # 111960
Wind- & rain sensor # 111961
Function of remote control
for
HCVAR
Close Stop Open Red LED
Pairing
HCVAR
with remote control
Pairing
HCVAR
with wireless wind / rain sensor
