http://www.advancedactuators.com
NextBolt User Manual
For support contact us a 1-800-408-7101 ext. 102
10
4.2 Installing Strike and Strike Lining Box
(on the door jamb)
A.
(1)
Close the door until the
deadbolt touches the door
jamb along the face plate
to mark the horizontal
center lines.
(2)
Measure one half of the
door thickness from one
side of the door jamb, and
then mark the vertical
center lines.
(3)
Extend the vertical center
line and the horizontal
line to mark the drill
center point for the strike.
B.
Bore a 1‖ diameter and 1‖
deep hole in the door jamb at
the center point for strike. To
ensure the proper deadbolt
function, this hole must be
drilled at least 1‖ deep.
C.
Chisel the door jamb at 1/16‖
deep for the strike plate which
must fit flush with the door
jamb.
D.
Insert the strike lining box and
then fasten screws to the plate.
www.BuilderDepot.com