ActSafe PMX, User Manual, Page: 50 / 70

Engine Inspection
Check following points on the
Honda Engine:
» Sufficient Fuel level
» Correct Oil Level
» Clean Air Filter
» Starting engine
» Throttle
» Turning of the Engine
with Engine Switch
Brake Testing
Check following points on the
Honda Engine:
1. Attach the Ascender to a rigged rope,
in a non-exposed location
2. Connect backup system and
Ascender to harness and ascend
50 cm off the ground and stop
the Engine
3. The Ascender should stay in the
same position without slowy
descending by itself
4. Descend slowly, just before touching
the ground release the Braking Lever
The Ascender should stop immediately.
If the brake is slipping do not use the
Ascender and get in touch with your
ActSafe distributor.
F.07 CHECKLIST BEFORE USE
Always check the Ascender before
every use. Check the Ascender
thoroughly and in accordance
with your training and this manual.
If you are in any doubt about the
condition of the Ascender, do not
use it and contact your ActSafe
supplier or ActSafe directly.
AS198 Actsafe PMX Manual Eng 2 20190319.indd 50 19/03/2019 19:09