ActSafe Systems AB
Sagbäcksvägen 13
437 31 Lindome
Sweden
T:
+46 31 65 56 60
E:
www.actsafe.se
Contact ActSafe or your local ActSafe Ascender
distributor for more information.
ActSafe Quick Start Guide Rev. 2.0
The Remote Control can be used for
a multitude of applications for both
personnel and equipment lifting.
The ACX Ascender can be operated
by a Remote Control to a distance of
up to 150 metres (492 ft) in direct line
of sight.
The Remote Control will override
the throttle control on the Ascender.
Once it is in use, it will not be
possible to use the Ascender by
its own controls. If the Remote
Control is not used for 10 seconds,
control is automatically returned to
the Ascender. Control is instantly
returned to the Ascender when
the remote is turned off with the
Power button.
150 m (492 ft)
UP/Speed Selection
Speed Indicator
DOWN/Speed Selection
Power Button
Link and Power LEDs
USB Protection Cap
Connection Point
Activate the Remote
Control by pushing
the Power Button.
1. Activation and connection
The green ‘POWER‘
LED will show and the
blue ‘LINK’ LED will
start to blink for a
few seconds whilst
a connection is
established with
the Ascender.
Once connected, the
blue ’LINK’ LED on the
Remote Control will
be lit continuously.
Select between 3
speeds in both ascent
and descent: 20%,
50% and 100%.
The speeds can be
set by a short push
of the ‘UP’ or ‘DOWN’
button and the LED
bar will indicate the
selected speed.
Short
press
3. Set the Ascender speed
20%
50%
100%
By pushing either the
‘UP’ or ‘DOWN’ button
the Remote Control will
take over the control
of the Ascender and
the Ascender will
stop immediately.
The green LED on
the Ascender will turn
blue to indicate control
has been taken over
by the Remote Control.
2. Take control of the Ascender
Short
press
H
Controls
H
Controls Summary
