Dehumidifying operation
MODE
UP/DOWN
ON/OFF
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the
button to select DRY mode.
2. Press the
buttons to set the
desired temperature.
3. Press the
button to start the air
conditioner.
The temperature
can be set within a range of 17 C~ 30 C
in 1 C increments.
O
O
O
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
NOTE
Adjusting air flow direction
Use the SWING and SWING
buttons to adjust
the desired airflow direction.
1. When the SWING button is selected, the horizontal
louvre changes 6º degrees in angle for each push.If
you the SWING button for more than 2 seconds, the
louvre will automatically swing up and down.
2. When the SWING
button is selected, the vertical
louvre changes 6º degrees in angle for each push.If
you the SWING button for more than 2 seconds, the
louvre will automatically swing left and right.
If the horizontal/vertical louvre swing
Is moved to a position which would affect
the cooling or heating of the air conditioner,
the unit will automatically change the swing
direction.
NOTE:
Timer operation
Press the TIMER ON button to set the auto-on
time of the unit. Press the TIMER OFF button
to set the auto-off time of the unit.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H" will disappear and the set temperature
will re-appear on the LCD display window.
To set the Auto-on time.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H" will disappear and the set temperature
will re-appear on the LCD display window.
1
2
1
2
3
MODE
MODE
SWING
SWING
TEMP
TEMP
SHORTCUT
SHORTCUT
FAN
SPEED
FAN
SPEED
TIMER
OFF
TIMER
OFF
RES ET
RESET
LOCK
LOCK
LED
FOLLOWME
LED
FOLLOWME
TIMER
ON
TIMER
ON
TURBO
SELF CLEAN
TURBO
SELF CLEAN
SWING
SWING
SLEEP
SLEEP
ON/OFF
ON/OFF
