Page 11
Operation Manual
LM7/24-2 Wall Controller
Operation Manual LM7-2 / LM24-2 Wall Controller
Document No. 0525-079
Ver. 1 190821
08.03. Cooling Operation (LM7-2)
1. Press the
Button.
2. Press the
Button until
COOL
appears on the display.
3. Set the desired temperature by pressing either the
or
Buttons.
• Maximum temperature setting 30.
• Minimum temperature setting 16.
• For a WARMER room temperature, press the
Button.
• For a COOLER room temperature, press the
Button.
4. Adjust the desired fan speed by pressing the
Button. When your air conditioner is turned On the indoor
fan can run continuously and is indicated by the
CONT
indicator. This is generally preferred during the cooling
mode to ensure maximum air circulation. However, during the heating mode this can create the effect of cool
drafts. It then would be preferable to have the indoor fan, cycle On and Off automatically with the Outdoor Unit.
This is selected by pressing the
Button until the
CONT
indicator is Off.
5. Press the
Button again. The system will retain your last setting until next operation.
08.04. Heating Operation (LM7-2)
1. Press the
Button.
2. Press the
Button until
HEAT
appears on the display.
3. Set the desired temperature by pressing either the
or
Buttons.
• Maximum temperature setting 30.
• Minimum temperature setting 16.
• For a WARMER room temperature, press the
Button.
• For a COOLER room temperature, press the
Button.
4. Adjust the desired fan speed by pressing the
Button. When your air conditioner is turned On the indoor
fan can run continuously and is indicated by the
CONT
indicator. This is generally preferred during the cooling
mode to ensure maximum air circulation. However, during the heating mode this can create the effect of cool
drafts. It then would be preferable to have the indoor fan, cycle On and Off automatically with the Outdoor Unit.
This is selected by pressing the
Button until the
CONT
indicator is Off.
5. Press the
Button again. The system will retain your last setting until next operation.
