25
Operation Manual
LC7-2 Wall Control
Operation Manual - LC7-2 Wall Control
Document: 0525-080
Ver. 1 190923
4. Press the
or
buttons to scroll from
OFF
to
ON
.
5. Press the
PROG
button to confirm the selection.
6. Press the
EXIT
button
thrice to go back to Main Screen.
13.03.02. Setting Temperature Set Back
NOTE
The Set back mode Cool to and Heat to limits can only be adjusted from the temperature set back menu. In the
occurrence of when the unit’s setpoint (prior to Set back operation) is below the Heat to limit or higher than the
Cool to limit, the unit’s setpoint will automatically become the new Set back limit.
1. Press the
PROG
button to enter program Menu.
2. Press the
or
buttons to navigate to Program Menu
03
.
3. Press the
PROG
button to enter Program Menu
03
. Display will show set back display
ON
field is blinking.
