Installation Guide
Easyconnect App
10
Installation Guide - Easyconnect App
Document: 9590-4009
Ver. 2 201126
5. Reattach the upper part to the PCB backing cover.
Buckle the upper case after adjusting it, to avoid clamping the wiring
during installation and clip it into place onto the backing plate mounted
on the wall or ceiling. (See Figure 4-11)
10
Fig 4-10
4. INSTALLATION METHOD
CAUTION
Avoid the water enter into the smart port, use trap and putty
to seal the connectors of wires during wiring installation. (
Fig.
4-9) When under installation, reserve certain length of the
connecting wire for convenient to take down the smart port
while during maintenance.
Putty
Putty
Trap
Trap
8. Reattach the upper part of the smart port
After adjusting the upper case and then buckle the upper
case; avoid clamping the wiring during installation. (Fig 4-11)
Fig 4-11
Figure 4-11
04. Download and Install the Easyconnect App
Search Easyconnect on your compatible mobile phone, tap download and
then open the app to create a new account. (Refer to Section 05, for new
account setup)
05. Create an Account
●
Please ensure that you have a secure and operational internet
connection readily available for the creation of your account and
system setup.
●
You will also require an active e-mail address which will be used as
your username when creating an account, logging into and using the
Easyconnect app.