ABC40UKA Manual
Page 9 of 35
Installing the Block-Up Converter
Tools and Test Equipment
Have on hand a standard electrician's tool kit and any tools listed in the antenna manufacturer's installation
instructions.
Site Considerations
The BUC is designed to mount on the antenna. Locate and install the antenna according to instructions
supplied by the antenna manufacturer. Choose an area that is free of extraneous interference from motors
and electrical equipment and has a clear line of sight from the antenna to the satellite. Lightning arrestors
should be used at the site to protect personnel and
equipment.
Preparation
Mounting Considerations:
Optional Mounting Brackets are available that will facilitate mounting for most antennas.
The ODU must be mounted such that:
- Sufficient support is afforded to the BUC, the LNB and the Power supply to minimize
the effects of antenna sway in strong winds.
- Air movement across the heat fins is possible.
- The length of the Power supply cables is taken into consideration in determining the
mounting location of the power supply.
Throughout installation and during any polarization, azimuth or elevation adjustment, ensure that cables
and waveguide are not crimped or pinched.
