INTRODUCTION:
Thank you and congratulations on your purchase of the
activBlaster System.
We are confident this system will provide you with years of fresh,
clean, and odor-free air!
UNPACKING/INSPECTION OF EQUIPMENT:
Please be sure to inspect the equipment upon receipt for any
possible shipping damage. If equipment is found to be damaged,
call activTek Commercial Support at 866-736-0503.
TYPICAL ODOR CONTROL DOSAGES
INDUSTRY
ODOR
APPLICATION
DOSE
RETENTION TIME
Smoke Fire Damage
Smoke
Direct Contact
0.5 to 1.5 ppm
N/A
Sewer Lift Station
Hydrogen Sulfide
Exhaust Gas Contact
1.0 to 2.0 ppm
N/A
Food Procession
Fermentation Odors
Building Exhaust
1.0 to 2.0 ppm
60 seconds
Cooking (Residential)
Cooking Odors (food)
Kitchen Exhaust Fan
System
1.0 to 2.0 ppm
N/A
Rubber Plant
Processing Odors
Exit of a Cyclone Collector
2.0 to 4.0 ppm
N/A
Fishery
Wet Scrubber Exhaust
Recovery Furnace Exhaust
5.0 to 10.0 ppm
N/A
Pulp Mill
Hydrogen Sulfide, Sulfur Dioxide
Exhaust Gas Contact
60.0 to 80.0 ppm
N/A
Compost/Waste
Ammonia and Sulfur Compounds
Direct Bilge
2.0 to 5.0 ppm
45 seconds
Marine
Bilge, Diesel Fumes
Engine Room Contact
0.5 to 1.5 ppm
N/A
Rendering
Organic and Chemical
Building Exhaust
94.0 ppm
5 seconds
Organic
Ammonia and Sulfur
Building Exhaust
5.0 ppm
30 seconds
TREATMENT PHILOSOPHY:
These units are intended to be used to treat unoccupied areas
only with high doses of ozone for sufficient sterilization and odor
removal.
SYSTEM FAMILIARIZATION:
45.0 ppm - 10880 mg/hr MAX; 90 cfm; 120 VAC
SPECIFICATIONS
ACTIVBLASTER
US40657B
Electrical
120VAC, 2.5 Amp, 50/60 Hz
250 watts
Mechanical
90 CFM fan
12 hour timer with hold function & hour meter
Dimensions
11.5"H x 40"L x 9"W
29.2cm H x 101.6cm L x 22.9cm W
Weight
22 pounds
10 kilograms
Ozone output
10,880 mg/hr
