10
CHANGING THE ACTIVEPURE CELL
•
UV Light in operation; disconnect unit from power cord before
servicing; failure to follow warnings may result in severe eye damage
•
Disconnect power at the breaker or fuse panel before
servicing unit; always follow OSHA lockout procedures to prevent
accidental exposure to electrical energy
WARNING
1 . Disconnect (unplug)
power cord from unit .
2 . Remove the four thumb
nuts .
3 . Remove the unit from the
mounting plate .
Power Cord
4 . Remove the two thumb
screws holding the
ActivePure Cell .
5 . Remove the used
ActivePure Cell from the base
unit and dispose of the bulb
properly .
6 . Plug the new ActivePure Cell
into the base unit . Be sure
Air Flow / Honeycomb Cell
direction is correct .
7 . Secure with two
thumb screws
8 . Insert the unit into
the mounting plate .
9 . Secure unit with
four thumb nuts .
10 . Reconnect power
cord .
Power Cord
Visit www.lamprecycle.org for proper bulb disposal regulations
NOTE:
Always follow OHSA electrical lockout safety requirements to prevent accidental
release of energy during service or maintenance activities .