Net Video Recorder Instructions
22
2
、
Choose the set motion detect channel.
3
、
Work mode choose disable,means that the motion detect function is on.
4
、【
EMAIL Notice
】【
Buzzer
】【
Alarm
】
,Choose the Settings as you needed.
5
、
Click“Apply”,Finish.
Note:Set in the [Net service] and send email.
4.7 Playback
1.Right click the blank of main interface -
> click “Video playback”-> click “Record setup”
【
Playback Time
】
Click to select 5/10/30Min playback time.
Before playing back the video, make sure that the hard disk is connected properly and the recording
function is enabled.
2.Right click the blank of main interface -
> click “Video playback”-> click “Manual search”
Step:
—choose channel NO.—choose record mode —Search time(input beginning time and end time)—
search,recording will come out ,drag time bar
—click playback to start
Tips:
Playback icon introduction:
playback l frame previous
playback l frame next
play
pause
fast forward x2,x4,x8
