Net Video Recorder Instructions
12
Introduction:
IPC can be placed between NVR and the other IPC to send and receive signals, when NVR
and IPC is too far to increase signal.
Right click the blank of main interface -
> click “video manage”-> click “Repeater”.
Step:
1.After connect the device, we can change the settings in repeater according to the rate.
2.
Click“+” and choose channel.for example,we choose CH2.it mean that CH2 also can receive signals
from CH1.
3.
Refresh information then click“Apply”.
4.3.2.Delete device
Introduction
：
Delete the IPC which you don’t need to use.
Step
：
1
、
Right click the blank of main interface -
> click “video manage”
2
、
Choose one channel-
> click “Delete” ,IPC will disconnect automatically.
Click “Delete All” will delete all the IPC
。
