Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Date Purchased:___________________
Serial#:_______________________________
Model #:__________________________ Supplier: ____________________________
Table of Contents
Usage
Seat
Remove by lifting one corner at a time or lift off one side only and pivot the seat up from the opposite side.
Folding Frame
Unfold
Move the side frames apart, Pull forward on the Fold Frame Pull Pin until the fold frame locks into place.
Fold
Push in on the Fold Frame Pull Pin and move the two side frames together until the frame is completely
collapsed.
Note: The pan hanger, commode pan and seat may be removed prior to folding. The back and flip back style arms
must also be removed prior to folding and placed into carry case.
Disassembly for Storage or Transportation.
Following the Usage instructions, remove the flip-up style arms (height adjustable
arms may not need to be removed from back assembly), remove the back
assembly, remove the rear wheels, remove the seat, remove the pan/hanger.
Fold the frame and secure it with the buckle. Place components into
storage/travel bag.
Follow Assembly instructions to reassemble the unit.
Back
Loosen then remove the self-locking nut and screw that are securing the back assembly to the frame. Pull up on
the back assembly. Re-insert the screw through the holes in the chair frame. Hand start the nut onto the end of
the screw.
Leg Rests
Adjust the height of the foot plate by depressing snap button and sliding foot plate mount up or down to obtain
correct height. Remove leg rest assembly by lifting up on the gooseneck to remove it from the receiver of the
front support.
Elevating Leg Rest
Adjust the height of the leg rest by depressing snap button and sliding foot plate mount up or down to obtain
correct height. Adjust the angle of the leg rest upward by lifting, lower by depressing the tab.
Arm Rests
Height-Adjustable Arm Rests
To raise the arm, push up on the armlock cap and pivot back the entire armrest. To lower the arm, pull down on
the front of the armrest until the arm latch locks onto the securing stud under the arm pivot.
Flip-Up Arm Rests
To raise the arm up, pivot the arm lock lever away from the armrest and armrest lock. Lift up on the armrest.
Remove by depressing the snap button and sliding it out of the armrest pivot.
Serial number is located on the
frame behind the wheel.
9
Buckle
