mVault I
Quick Start Guide
9
mVault I Quick Start Guide 2012 - v1.0
mVault supported options
UPS control
UPS control for mVault is managed by ActiveRAID or mRAID UPS connection.
System Management
System Management is performed remotely using Active Viewer and Active Admin, no direct connection other
than SAS I/O is required.
System Problems
If you should ever experience a problem with your mVault system, you can quickly assess the problem using
the Active Viewer software on a remote computer. In addition, if you are near the system, you can refer to the
system status indicators on the enclosure in order to determine the component at fault.
If you are unsure about replacement or require a service part, you can contact your reseller, or call Active
Storage support directly at
1-818-709-1133
. Alternately you can contact support at
support@active
-
storage.com
or visit
www.active
-
storage.com/support
for the diagnostic information.
CAUTIONS
The pre-installed hard disk modules were designed specifically for use in the mVault. They will not function
correctly in other systems. Using these hard disk modules in another system may result in data loss.
The mVault system is designed for continuous use as a high-density archive storage. No system maintenance
other than periodic vacuuming of the front panel is required.
