Harrier series camera
.
September 2022
www.activesilicon.com
Page 43 of 52
Alarm Setting
Figure 63. Alarm Setting
Video Mask
Figure 64. Video Mask
"Detection type": The equipment can be selected (
) according to requirement.
Channel: Set up according to requirement.
Enable: click Enable and set according to requirement.
"Sensitivity": The equipment can be set up (0-100) as required.
"Alarm threshold": the equipment can be set up (0-100) according to requirement.
Area: Use the mouse to click and drag settings. The red areas are the monitoring area, and
the grey areas are the non-monitoring area.
"Select all areas": to Select all areas as the monitoring area.
"Clean up all areas": Clean all the monitoring areas.
"Time Period": Click the Settings button to pop up the Time Period Settings menu. Time
settings can be set for 6 periods per day. Synchronization settings can be selected by
target and for a whole week. Settings should to be saved after completion. In addition,
there is individual reset, all reset, confirm, cancel and other functions buttons, which can be
operated according to requirement.
"Send mail": click Enable according to requirement of settings. This requires the support of
network mail function settings