Harrier series camera
.
September 2022
www.activesilicon.com
Page 42 of 52
Refresh: Click to refresh the display
All Resets: All settings are restored to default
Video Control
Figure 61. Video control
"Video Control": there are Configuration, Always, Close Control options, and these can be
set up according to requirement
"Save": click Save after setting, it will pop up and save successfully
Refresh: Click to refresh the display
Hard Disk Management
Figure 62. Hard Disk Management
"Hard Disk Management": It can display the hard disk information, such as hard disk serial
number, physical serial number, disk group, hard disk status, attributes, surplus capacity,
and total capacity, etc.
Refresh: Refresh display
"Hard Disk Settings" select the serial number of the hard disk first according to requirement,
and then select "Set Read-Write", "Set Read-Only", "Set Redundancy", "Clear Data",
"Recovery Error", "Repartition", "Format". Click Confirm on the pop-up menu, and set up
according to requirement.