15
Active Mobility | xtaga Impala | User Manual
Battery Charging
and Care
5.1 CHARGING THE BATTERY
Follow the procedure below step by step:
1. Turn the power switch to (OFF)
2. Connect the charger’s power cord into the power outlet.
3. Open the charging socket cap on the battery pack. Then connect the charger’s
round plug to the charging socket.
4. Turn on the switch on the charger.
5. The charger’s LED will be green when the power is on and will turn red when
charging. The charging duration is approximately 6 hours. To ensure optimum
performance a 10-hour charge is recommended. But we do not recommend a
charging more than 24 consecutive hours.
6. The charger’s LED will be RED during the charging process. The LED will turn
green when charging is completed.
7. Turn off the charger; disconnect the power cord and the round plug from charger
socket on the scooter.
Warning
• The fan inside the charger will be activated automatically
when you turn on the charger. If the fan does not work
when connected to the charger or the green light is
not showing, DO NOT use this charger. It may lead to
overheating of the charger and cause a fire as a result.
• There is a red LED present on the charger to illustrate
operation. If this LED does not illuminate the charger is
defective, please contact your dealer.
☞
Attention
• While gripping or folding the handle bar, use caution
ensuring fingers or hands are not in a position where
they could be caught in the handle area.
• While returning the battery pack to the battery pack
cavity of shroud, use caution ensuring fingers or hands
are not in a position where they could be caught
between Battery pack and scooter body.
5
