Walden Tent Installation Guide
Active Grow LLC, (206) 792-9799, 12345 Lake City NE #2137, Seattle, WA 98125
www.activegrowled.com
Tent Assembly Instructions (continued)
7. Create the Medial Roof Support by sliding the Medial Roof
Support Clamps x2 onto the ends of A Pole x1. Attach it to the top
of the tent frame in the center. Make sure the open part of the
clamps face the floor when attaching the support.
8. Create the Lateral Roof Supports by sliding the Lateral Roof
Support Clamps x4 onto the ends of A Poles x2. Attach them to
the top of the tent frame below the Medial Roof Support. Make
sure the open part of the clamps face the floor when attaching
the supports.
Medial Roof Support x1
Lateral Roof Supports x2
Ax1
x2
Ax2
x4
A
G-
44
TENT
-W
-IG-
28122
0
9. Unzip all zippers before covering the framing with the tent.
Spread the tent on the ground and put the tent frame into the
bottom of the tent covering.
10. Place the tent covering over the top of the tent frame and
continue to wrap the sides and front of the frame. Note do not use
excessive force when stretching the tent covering over the frame.
11. Zip all tent seams together and insert the spill tray into the
bottom of the tent. Use the velcro straps on each corner of the spill
tray to attach it to the tent’s corner poles.