Activ8rlives Pulse Oximeter2 Bluetooth, Manual

Page: 8 / 40

8
Charging Your Activ8rlives Pulse Oximeter2
Note: Do not tamper or attempt to open the unit in which the non-rechargeable
batteries are housed, your warranty will be invalidated. Substances contained within
the battery may damage the environment or human health if handled and is a risk of
electrical shock or burns. When disposing of this product and its batteries, ensure that it
is collected separately for special treatment and not as normal household waste.
Your Activ8rlives Pulse Oximeter2 uses two AAA
1.5V alkaline batteries, which are supplied. These
are non-rechargeable batteries and no attempt
should be made to recharge these.
Remove the back cover and add the 2 x
AAA 1.5 V alkaline batteries in the direction
indicated.
Replace the cover. The OLED Display should
light up now when you press the On/Off
Button.
If not used, it will power off after about 10
seconds to save battery power. A faulty
operation would make it power off also.
Remove the batteries if you are planning to
store the device for a long period of time.
We hope you use your device for many
years of course, but long periods of storage
with the batteries in place may damage
the device and will cause the batteries to
discharge.
Replace the set of batteries (2 x AAA) in the right
direction when the battery symbol on the
OLED
Display is shown an empty or low battery
symbol.
+
_