ACTiSYS ACT-IR100S, User Manual

Page: 8 / 23

&'(
●
Serial Port: When connecting modems etc. to the Data Communication Equipment
(DCE) side, connect the corresponding signal names of the modem and .
When connecting to PC’s to the Data Terminal Equipment (DTE) side use a cross
connection for and the PC or Plotter/Printer(with RS232 port).
Example Connection Reference #1: Modem (DCE) Connection
I/F < Straight Cable > Modem(DCE)
RxD RxD : Data Receiving
RD RD Only valid with received data
when the DCD (CD) signal is on.
TxD TxD : Data Transmission
SD SD Valid with sending data when
RTS (RS), CTS (CS), DSR (DR),
DTR (ER) are on.
/DTR /DTR : Data Terminal Ready
ER ER Turns on when receiving and
transmitting of data is possible
and when the terminal has power.
/DSR /DSR : Data set ready
DR DR Turns ON when the modem
is able to send and receive.
/RTS /RTS : Transmission Request
RS RS Instructs the modem to be in
transmission mode. The terminal is
turned on before the transmission.
/CTS /CTS : Transmissible
CS CS Indicates that the modem is able to
transmit. When CS is ON the
modem is able to receive.