9
Introduction
Connecting the Gateway
There are many variables involved when connecting the Gateway, depending on the
type of Internet service available. The figure below shows all of the possible connec-
tions available for the Gateway.
Power
Outlet
Power
Adapter
Coaxial
Outlet
MoCA
Cable
T3200M
Optical
Fiber
Cable
WAN Ethernet
Cable
LAN Ethernet
Cable
Ethernet
Port of
Device
WAN
Ethernet
Port
USB
Cable
USB
Port of
Device
Service
Provider
Connection
(Rear Panel)
DSL
Cable
DSL
Outlet
Connecting a Computer to the Gateway
To connect a computer to the Gateway to access the Gateway’s graphical user inter-
face (GUI):
1.
Get the Gateway and black Power cord from the box.
2.
Plug the black Power cord in the black port on the back of the Gateway and
then into a power outlet.
3.
Plug the yellow Ethernet cable from the box into one of the four yellow
Ethernet ports on the back of the Gateway.
4.
Make sure the computer is powered on, then plug the other end of the yel-
low Ethernet cable into an Ethernet port on the computer.