3
Part II. Connecting to a Receiver
If the computer being used does not have Miracast or WiDi enabled, the
ScreenBeam
Wireless Display
software must be loaded onto the computer connected with the
Transmitter, and then the Receiver must be paired to the Transmitter. Make sure you have
the following items handy:
l
ScreenBeam USB Transmitter
l
ScreenBeam Wireless Display software CD
l
A compatible computer running Windows 7, 8 (8.1) or 10
2.1. Loading the Software
To load the ScreenBeam software and connect the Transmitter to a computer:
1. Insert the ScreenBeam CD into the CD drive of the computer.
2. An AutoPlay window appears. Click
Run setup.exe
, and then follow the onscreen
instructions.
If the AutoPlay screen does not appear, locate the CD-ROM folder, then double-click
setup.exe
. If the computer does not have a CD/ DVD drive, go to
http://www.actiontec.com/products/sbupdate.php
to download the software.
3. A series of screens appears. Follow the on-screen instruction to complete the software
installation.
4. After the software installation is finished, insert the Transmitter into a USB port on the
computer.
