22
Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual
23
Chapter 5
Setting Up Static IP Address
7.
The “Internet Protocol (
TCP/IP
) Properties” window appears.
8.
In the
General
tab, make sure the circle next to “Use the following
IP
Address”
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
9.
Enter the following address in the “
IP
Address” text box:
192.168.1.2
Enter the periods in the address by pressing the space bar on the keyboard.
10.
Enter the following address in the “Subnet mask” text box:
255.255.255.0
Enter the periods in the address by pressing the space bar on the keyboard.
11.
Click
OK
. The Internet Protocol (
TCP/IP
) Properties window disappears.
12.
In the Local Area Connection Properties window, click
Close
.
The Local Area
Connection Properties window disappears.
13.
Click
Close
in the Local Area Connection Status window. The window
disappears.
14.
Close the Network and Dial-up Connections window by clicking on the “
x
”
button at the upper right corner of the window.
The computer is now set up with a static
IP
address.
