ActionTec GT704WGB, User Manual

Page: 38 / 73

37
Chapter 5 Configuring Advanced Settings
4.
Enable Public/Private
IP
!DDRESSING4HISFEATUREISUSEDINCONJUNCTIONWITH
-ULTIPLE3TATIC)0!DDRESSES7HENSELECTEDTHE'ATEWAYUSES
.!4
for private
IP
addressing for the
,!.
, allowing both public and private
IP
addressing to be
configured to the
,!.
simultaneously, while the
$(#0
server is reserved for
PRIVATE)0ADDRESSING!LLCOMPUTERSUSINGPUBLIC
IP
addresses must have the
public
IP
addresses statically assigned.
5.
Select the
DNS
type. If static
DNS
address was selected, enter the primary
DNS
address and, optionally, the secondary
DNS
address in the appropriate text
boxes.
6.
Select Dialout on-demand (optional). To have the Gateway automatically
connect to the Internet whenever needed (when a Web browser is opened,
FOREXAMPLE ACTIVATEh$IALOUTONDEMANDvBYCLICKINGINTHEAPPROPRIATE
check box. When Dialout on-demand is activated, the user can also set the
Gateway to disconnect from the Internet after a certain amount of idle time
(no Internet activity). To do this, enter the number of idle time minutes
(minimum 2 minutes) before disconnection occurs in the text box before
h-INUTESv
7.
!DJUST
MTU
settings (optional). Enter the maximum transmission unit (
MTU
)
value (in bytes) in this text box. This value corresponds to the largest physical
packet size the network is allowed to transmit. Packets larger than this size are
divided into smaller packets. It is recommended to leave this value set at the
default (1492).
When finished in this screen, click
Apply
to activate any changes made.