ActionTec GE344000-01, User Manual, Page: 30 / 87

27
Chapter 4 Advanced Setup
Static Routing
Selecting Static Routing in the “Advanced Settings” screen generates the “Static
Routing” screen. Enter the addresses in their respective text boxes, then click Add .
The address will appear in the “Static Routing Table.” To remove an address, high-
light it by clicking on it in the Static Routing Table, then click
Remove .
MAC Address Cloning
Selecting
MAC
Address Cloning in the “Advanced Configuration” screen generates
the “
MAC
Address Cloning” screen. A
MAC
(media access control) address is an
identifier unique to every networkable device. Some Internet Service Providers
(
ISP)
require a
MAC
address to validate a computer’s permission to be on their net-
work. If the
ISP
requires this information, obtain the
MAC
address of the computer
originally configured for the
ISP
(see Appendix D for instructions to determine the
computer’s
MAC
address). Enter the
MAC
address in the “User Select
WAN MAC
Address” text boxes in the “
MAC
Address Cloning” screen.