ActionTec 802CTG, User Manual

Page: 8 / 41

5
Setting Up
the PC Card
The instructions that follow in this chapter parallel the steps contained in the
Action tec Connection
1-2-3
®
setup utility, which provides a visual, step-by-step guide
to setting up the
PC
Card. It is recommended the user run Connection
1-2-3
first,
before attempting any other procedures.
To set up the
PC
Card, the drivers must be loaded, the
PC
Card inserted into the
PCMCIA
slot of the computer, and then the
PC
Card configured. Also, make sure
there is an available wireless signal (through an access point or another computer)
to which the
PC
Card can connect.
1.
Insert the Installation
CD
in the
CD-ROM
drive of the laptop computer.
Connection
1-2-3
starts automatically. Temporary files and drivers for the
PC
Card are loaded onto the hard drive, then the first Connection
1-2-3
screen
appears. Read the onscreen instructions, then click Next.
☞
Note : If Connection
1-2-3
does not start automatically, click
Start from the desktop, then select Run . Type
d:\c123.exe
(with “d” representing the drive letter of the computer’s
CD-
ROM
drive) in the “Open” text box, and click OK .
2