9
Step 6
Put the chassis cover back on the computer.
Step 7
Be sure all of your system’s components are turned off, then reconnect the
power cables to the computer and its peripherals.
Step 8
Connect the telephone line cable to the
Line (Telco) jack as shown below.
Figure 3: Connecting Devices
On the rear panel of your modem are input jacks to connect devices to the
modem. As shown in the diagram, there are jacks for connection to a
phone
and to a phone
line.
The connector labeled “Line (Telco)” is meant to be
connected to a
standard
analog phone line. To help reduce the load on your
phone line, it is recommended that the modem be the only device con-
nected.
Step 9
Turn on the computer and proceed to the following sections to configure
the your computer’s operating system for use with the 56K Internal PCI
Call Waiting Modem.
Summary of Contents for 56K Internal PC Modem
Page 1: ...56K Internal PCI Call Waiting Modem User s Manual...
Page 55: ...55...
Page 56: ...56...
Page 57: ...57...
