11
S002042 10ft Inground Trampoline
Assembly Instructions
Step 1
Lay out the Top Rails (Part 3) & take out the 6 x T-Joints (Part 4) and place these in between each Top Rail
(Part 3).
Next begin assembling the frame by placing the Top Rails (Part 3) into the T-Joints (Part 4).
To assemble this trampoline all you will need is the spring hook that is provided within the carton. During
periods of non-use, the trampoline can be disassembled and stored.
Prior to assembling this trampoline, remove all parts from the carton and check to ensure that all parts
listed in the Parts List on page 10 are present. If you’re missing any of the parts, please call our National
Service Centre to have replacement parts sent out prior to beginning assembly (details can be found in
the warranty pages at the end of this manual).
NOTE:
It is recommended that 2 adults assemble this trampoline.
4
3
NOTE:
DIAL BEFORE YOU DIG – 1100 or enquire at www.1100.com.au
NOTE:
If you are missing parts or having issues at any time during assembly call our service
centre on 1800 465 070