background image

3

S002025 Action 4 Unit Swing Set

Important Safety Information

To reduce the risk of serious injury, read the entire manual before you assemble or use this swing set. In 
particular, please note the following safety precautions. Please keep this manual in a safe place for future 
reference. Failure to assemble and maintain this product correctly may cause injury to the user.

1. 

Prior to assembly, this swing set includes small parts/accessories that are not suitable for 
children under 3 years of age as they may cause a choking hazard.

2. 

This swing set should be assembled by 2 adults.

3. 

This swing set is designed for domestic use only, it is not intended for commercial use in 
play centres, nurseries, etc.

4. 

This swing set is designed for use by children 3-9 years of age.

5. 

This swing set has a maximum user weight of 34kg per unit/seat, totalling 170kg across 
the entirety of the swing set.

6. 

Do not install this product over concrete, asphalt or any other hard surface.

7. 

Do not orientate the swing set directly towards the sun.

8. 

There should be at least 2m of space surrounding the swing set from any structure of 
obstruction such as a fence, garage, house, wall, overhanging branches, laundry lines, 
electrical wires, etc. 

9. 

Regularly check the swing set for wear and damage, replace any worn or damaged parts 
immediately. Remove the swing set from use until replacement parts are fitted. Check all 
hardware regularly and tighten when required.

10.  Do not overtighten the nuts and bolts. Use hand tools only, do not use power tools as this 

can weaken the connection points. 

11.  The minimum distance between any swing and the ground is 350mm.

12.  Swings must not exceed an angle of 60 degrees from the ground.

13.   This swing set must be anchored firmly into the ground using the included ground pegs.

14.  Children must be supervised by an adult at all times when the swing set is in use.  

15.   Only 1 child should use each swing (unless specifically designed for 2 children) at any time.

16.  Do not stand on the seats when using the swing set.  

17.  Do not use the swing set when it is wet as it will become slippery and serious injury may 

result.

18.   Do not climb on or jump from the swing set when it is in motion.

19.   Do not climb or hang on the frame of the swing set.

20.  Do not allow additional foreign objects to be attached or used with the swing set.

Summary of Contents for S002025
















Reviews: