background image

14

S002025 Action 4 Unit Swing Set

Warranty Information

Congratulations on your purchase!

This 

Action 4 Unit Swing Set

 is warranted to be free from defects in material and workmanship under 

normal use and service conditions for a period of 

2 years

 on the frame and 

12 months

 on all other parts,

 

from the date of purchase of this article. Evidence of unfair usage or incorrect adjustment by the owner 
will void this promise.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are 
entitled to a replacement or refund for a major failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail 
to be of acceptable quality and the failure does not amount to a major failure.

The benefits conferred by this warranty are in addition to the consumer guarantees and other rights and 
remedies in respect of the product which the consumer has under the Australian Consumer law.

Conditions of Warranty

All warranty coverage extends only to the original retail purchaser from the date of purchase. Please 
keep your receipt, tax invoice or other proof of purchase.

This warranty does not extend to any damage to a product caused by abuse, improper or abnormal 
usage, or repairs not provided by us or our Service Centre. Nor does this warranty extend to products 
used for commercial or rental purposes. This warranty does not cover ordinary wear, tear and 
weathering, failure to follow directions, improper installation, improper maintenance or acts of God (such 
as damage caused by storms, lightning, heavy winds and by snow or ice).

Making A Warranty Claim

In order to make a claim under this warranty please direct your enquiries to our Service Centre. You can 
contact them on our 

Freecall 1800 465 070

 number or send mail to them at National Service Centre: 

2/24 Anderson Road, Smeaton Grange, NSW 2567 – if mailing please include your contact details.

A service representative will then assist you in the appropriate action to be taken. For efficient processing 
of your enquiry please have proof of purchase, the date of purchase and the retailer name you purchased 
the item from, and the brand on the product. Photos of the product, and scans of receipts, may be 
requested to assist with your claim.

Summary of Contents for S002025
















Reviews: