Action Sports Equipment S000665, Assembly, Installation, Care, Maintenance, And Use Instructions

Page: 15 / 25

1.3 Slide the Foam Sleeve (MF-8) to the Lower Leg Tubes (MF-5) to cover the leg foam. Fix the connector
(SS01) with Bolt, Washer & Nut of S1. Please see Figure 4.
Figure 4
1.3 Secure the completed Leg Tubes to the Top Support Tube Braces (MF-2) with Bolts, Washers & Nuts of A3.
Put the Leg Stay (MF-3) onto the leg tube. Align holes and fasten with Bolts, Washers & Nuts of A1.
Attach the leg foam (MF-6a) and Sleeve (MF-9) to cover the right front leg (MF-6). When it is completed,
the swing set main frame will look like as Figure 5.
Figure 5
©
ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 15