2. -5
Use the four 110mm screw bolts(A), washer (F & G) and nut (P) to attach the legs to the
lower support tube (J). And, insert the cap (Z) to the lower support tube.
Attach the legs (L) to the highest of holes on the lower support tube and legs (O) to the
remaining set of lower holes. (See Fig. : 5)
2. -6
Use the 70mm screw bolt: ©, washer (S & T) and nut (U) to attach the upper support tube
(I ) to the main center bar (H). (See Fig. : 6)
Insert small plastic tube (W) on support tube.
2. -7
Insert plastic cap X into each end of Leg
Your rotating see-saw is now ready to enjoy! (See Fig.: 7)
1. This equipment must be assembled and checked by an adult.
2. Regularly check all nuts and bolts for tightness before use and replace any worn,
defective or missing parts. DO NOT try to repaire broken parts.
3. Regularly check seat, steel tube and other parts are tightened completely and replace
worn & damaged parts when necessary.
4. Remove wore and damage parts from use when necessary until replacement parts are fitted.
5. At the beginning of each season, please oil all metal parts to maximise lifespan of product.
Regularly oil when necessary during the usage season.
6. Seesaw set placement:
(a)
Place this equipment on a level surface at least 2 meters from any structure
or obstruction. Such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
(b)
Do not install this equipment over concrete, asphalt or any other hard surface.
(c)
Place this equipment in a well lit area.
(d)
This product is not designed for indoor use.
7. Weather condition:
(a)
Seats should be kept dry--do not use when they are wet.
(b)
Do not use in high winds or during volatile weather conditions.
8. This item is not designed for adults or maximum combined weight of 2 children not to
exceed 70kgs.
9. Please keep these instruction in a safe place for future reference.
Page 5 of 5
Care and Maintenance
