Click & Go Extreme Cold Chain EU868 Quick Starter Guide – V1.0
7
3.4.5
Antenna Installation
First, fix the universal antenna support on the enclosure support using provided screw and nut. Next, fix the
antenna on the moun2ng set:
Once the RF antenna is fixed, connect the N connector of the antenna cable on the connector based on the
bokom of the casing as described on the figure below.
For safety reason, the power supply of the product must be disconnected before plugging the N connector.
3.5
CABLING AND POWER SETUP
Once the RF antenna and the Ethernet wires are connected the Lora IoT Sta2on can be powered on.
To POWER
ON the LoRa IoT Sta2on, connect the POE injector on the 230VAC main power supply.
3.6
CONNECTION TO INTERNET
The following diagram describe how to connect the Gateway, POE to your internet router or switch.
The Gateway comes fully provisioned and ac2vated in your ThingPark account.
No technical seZng is needed
Long Range IoT Station
Installation and
Maintenance
Manual
Reference:INSTALL_Long_Range_IoT_
Station
Version ........ 1.0
Author ......... Lénaïc LOUVEL / Samuel
NICOLAS
Date ............. 08/04/2015
Classification
level
1 - Internal use only
2 – Confidential
3 - Confidential limited
This document is owned by
KLK
and can not be distributed, used and/or reproduced without
KERLINK
written
authorization.
Page
23
/
31
The Ethernet wires must be connected as described in §6.2.1.
6.4.2
LoRa RF Antenna connection
LoRa IoT Station is delivered with a 868MHz antenna.
Figure 21 : Technical antenna specifications
First, fix the universal antenna support on the enclosure support using provided screw and nut.
Next, fix the antenna on the mounting set:
Figure 22 : attachment of the antenna on the mounting set
Once the RF antenna is fixed, connect the N connector of the antenna cable on the connector based on the
bottom of the casing as described on the figure below.
For safety reason, the power supply of the product must be disconnected before plugging the N connector.
Universal antenna support mounting screw and nut
Long Range IoT Station
Installation and
Maintenance
Manual
Reference:INSTALL_Long_Range_IoT_
Station
Version ........ 1.0
Author ......... Lénaïc LOUVEL / Samuel
NICOLAS
Date ............. 08/04/2015
Classification
level
1 - Internal use only
2 – Confidential
3 - Confidential limited
This document is owned by
KLK
and can not be distributed, used and/or reproduced without
KERLINK
written
authorization.
Page
13
/
31
6
Installation procedure
6.1
Installation topology
6.1.1
Single station installation
With SIM Subscription
Without SIM Subscription
Figure 7 : Single station installation (with SIM)
Figure 8 : Single station installation (No SIM)
