Click & Go Extreme Cold Chain EU868 Quick Starter Guide – V1.0
3
1.
INTRODUCTION
Thank you for purchasing this
“
Click & Go Extreme Cold chain monitoring package
”
.
The aim of this package is to monitor the temperature of your assets exposed to extreme temperature or
difficult radio environment.
This package does not require any configura2on. The hardware is fully configured and ac2vated on the
ThingPark Wireless network. Therefore, you only need to install the hardware on your premises, connect the
gateway to the internet and start monitoring your assets. Easy!
All soaware and tools are available with your ThingPark Store creden2als. We use the Single Sign On to provide
the best experience.
2.
PRODUCTS
This package contains:
-
2 SenSingLab TEM-14-NS and accessories
-
1 Kerlink Outdoor Gateway and accessories
3.
GATEWAY
3.1
PRODUCT OVERVIEW
The outdoor gateway uses LoRaWAN technology and is complied with specification defined by LoRa Alliance.
This gateway has one LoRa & one GPRS ports and is powered through PoE. A GPS module with a passive
antenna are also built-in inside the gateway. Its LoRa interface operates in ISM bands and supports end-
devices with class A & C, Listen Before Talk, Spreading Factor, Adaptive Data Rate (ADR) and GPS Timing.
3.2
CONTENT OF THE BOX
The Gateway comes completely package in a box. Inside you will find the following elements:
§
The casing (item 1)
-
1 cable gland for RJ45 POE (item 2).
-
1 N connector (item 3) to connect LoRa antenna
-
1 pressure stabilizer for protection against condensation (item 4)
§
LoRa RF antenna connec2on with N connector (item 5) and its cable
§
A POE injector (item 7) and its power supply cable.
§
The internal shielding (item 8)
§
A moun2ng kit (item 6) designed to answer different installa2on configura2ons:
-
Pole moun2ng by U-bolt (delivered by default)
-
Wall moun2ng
