background image

ABOUT BLOOD PRESSURE

ABOUT BLOOD PRESSURE

15

14

1. Individual blood pressure varies every day. 

It is also affected by the way you tie your 

cuff and your measurement position, 

so please take the measurement in 

the same conditions.

2. Blood pressure variation is greater

if the person takes medication.

3. Make sure you wait at least

3 minutes before taking another 

measurement.

Why does my blood pressure vary, even in one day?

Will I get the same result if I 

measure on the right arm?

It is ok to use the device on both arms, 

but the results may differ depending on 

the person. It is recommended that you 

measure on the same wrist every time 

to maintain an accurate record of 

measurements.

Why is the blood pressure 

I get from the hospital 

different from home?

Blood pressure can vary even 

during a 24 hour period due to 

influences like the weather, 

emotions, exercise etc. You may 

experience different environmental 

and emotional conditions at a 

hospital compared to at home 

which can affect your blood 

pressure measurements.

Pay attention to the following 

when measuring your blood 

pressure at home:

If the cuff is tied properly.
If the cuff is too tight or too loose.
If the cuff is tied on the upper arm.
If you feel anxious or under pressure, 

take a few deep breaths before 

beginning.
If your measurement is inaccurate,

wait 4 to 5 minutes before retesting.

What are systolic pressure and diastolic pressure? 

press

artery

vein

blood discharging

Systolic

relax

blood entering

Diastolic  

What is the standard blood pressure classification?

When ventricles contract and pump blood out 

of the heart, the blood pressure reaches its 

maximum value in the cycle, which is called 

systolic pressure. When the ventricles relax, 

the blood pressure reaches its minimum 

value in the cycle, which is called diastolic 

pressure.

Irregular Heartbeat Detector

This Blood Pressure Monitor is equipped with an intelligent Irregular Heartbeat (IHB)

Detector function. During each measurement, this equipment records the 

heartbeat intervals and works out the standard deviation. If the calculated value is 

larger than or equal to 15, this equipment will light up the IHB symbol on the screen 

when displaying the measuring result.

CAUTION

The appearance of the IHB icon indicates that a pulse irregularity consistent with 

an irregular heartbeat was detected during measurement. Usually this is NOT a 

cause for concern. However, if the symbol appears often, we recommend you 

seek medical advice. Please note that the device does not replace a cardiac 

examination, but serves to detect pulse irregularities at an early stage.

Only a physician can tell your normal BP range. Please 

contact a physician if your measuring result falls out of the 

range. Kindly note that only a physician can tell whether 

your blood pressure value has reached a dangerous point.

The blood pressure classification published

by the World Health Organization (WHO)

and the International Society of Hypertension (ISH)

in1999 is as follows:

SYS

DIA

<120

<80

120-129

80-84

130-139

85-89

140-159

90-99

160-179

100-109

≥180

≥110

Level

Blood

Pressure (mm Hg) 

Optimal

Normal

High-normal

Mild

Moderate

Severe

CAUTION

Summary of Contents for ACMMD002














Reviews: