mode.
1-5 represents one of the 5 zone type:
1.NORMAL
2.STAY ARM
3.INTELLIGENT
4.EMERGENCY
5.CLOSED
The first 0/1 represents 0 siren of panel produce no sound upon alarming
while 1 is sounded.
The second 0/1 ,0 means NO and 1 means NC
NO means short-circuit to alarm
NC means open-circuit to alarm
Example: Set 7 zone to NORMAL, NC alarm, without sound when
alarming ,
Method one:
After calling and connected to the panel from remote,
press6107101#
Method two:
Send SMS message 12346107101#
Remark:
1) set 7 zone to NO alarm ,in the arm status ,when7 and GND to be short-
circuit condition ,the alarm system would be alarming.
2) set 7 zone to NC alarm ,in the arm status ,when 7 and GND to be open
circuit condition ,the alarm system would be alarming.
Usually Suitable for connect the alarm port of the wired accessories.
Syntax:
【
61
】
+
【
07-10,zone
number
】
+
【
1-
5
】
+
【
0/1
】
+
【
0/1
】
+
【
#
】
Siren
volume
adjustment
Valid value is from 00 to 99 as largest, system default is the largest.
Example: users need to set volume to 50
。
Method one:
After calling and connected to the panel from remote, press
6250#
Method two
:Send SMS message 12346250#
Syntax:
【
62
】
+
【
00-99
】
+
【
#
】
Auto
dial-up
function
when
power off
When power off ,auto dial function on or off .1 for on ,0 for off ,the
panel would not dial the pre-set phone number.Default is 0.
Example: user want to receive the call from the panel when power off .
Method one:
After calling and connected to the panel from remote, press
641#
Method two
:Send SMS message1234641#
Syntax:
【
64
】
+
【
0/1
】
+
【
#
】
Set
audible
confirmation from
panel to on or off
Alarm panel will produce audible confirmation beep upon receipt of
signal from remote control. 1 is on, 0 is off, default is on.
Example: users need to disable the audible confirmation.
Method one:
After calling and connected to the panel from remote,
press110#
Method two:
Send SMS message 1234110#
Syntax:
【
11
】
+
【
0/1
】
+
【
#
】
Enable or disable
the SMS Messaging
1 is on and 0 is off. Default is on
Example: the user will need to turn off the text messaging feature
